Interlocking paving
PROJECTS
Pave and Go is an Italian-made, dry-lay paving system built for interlocking paving projects that can’t afford disruption. Produced by Emilgroup in porcelain stoneware, it gives architects, specifiers and contractors a glue-free paving system that goes down fast, stays clean on site and adapts to almost any commercial floor renovation, indoors or outdoors. Because each tile locks into place without adhesives or screeds, the floor is never fixed: individual tiles can be lifted, replaced and reinstalled, so the same self-locking floor tiles can be reconfigured or reused as the space changes.
Explore the projects below to see how the system performs across real indoor and outdoor settings.
One system, two worlds: indoor and outdoor paving projects
Pave and Go is an interlocking porcelain stoneware paving system installed dry, with no adhesives, screeds or demolition. Made in Italy by Emilgroup, it pairs 60×60 cm tiles bonded to a polyurethane backing with a patented one-click joint, delivering certified performance, premium finishes and a fully reversible installation. Architects, retailers, hospitality groups and contractors specify the same system across every project zone, from residential interiors to large outdoor builds. One specification, indoor and out.
Why dry-lay flooring matters in commercial renovation
Dry-lay flooring is a system installed without cement, adhesives or curing times. In commercial renovation, where projects are won or lost on timelines, this matters: Pave and Go installs at around 25 m² per person per hour, year-round between -5°C and +35°C, with floors walkable and loadable the moment the last tile clicks in. For owners and operators asking how to renovate a commercial floor without closing the business, dry-lay paving protects revenue, controls budgets and removes the critical-path risk from any refurbishment programme.
One system for retail, hospitality and public spaces
Pave and Go is a single specification covering every project zone, indoor and outdoor: shop floors, supermarket aisles, restaurants, hotel lobbies, offices, exhibition stands, museums, balconies, terraces, pool decks, beach resorts and public squares. Two thicknesses fit every brief: 18 mm for residential and light-commercial interiors plus pedestrian outdoor areas, and 28 mm certified for loads up to 2000 kg in intensive commercial use. One product family across the entire floorplan, with no need to coordinate multiple suppliers, finishes or installation protocols.
Floor renovation without demolition
Demolition is the most expensive, dirtiest and longest phase of a traditional flooring job. Pave and Go is engineered to skip it. The interlocking modules install directly over the existing floor, with no need to break out ceramic, concrete, stone or resin substrates. For anyone searching how to renovate a floor without demolition, the patented click system removes waste removal, substrate remediation and extended construction sites from the brief. For architects working on heritage or occupied buildings, it preserves the existing structure and protects neighbouring finishes throughout the entire refurbishment.
Reversibility as a design value: glue-free flooring
Glue-free flooring is paving installed without adhesives, mortars or chemical bonding. With Pave and Go, every tile remains an independent unit: damaged modules or layout updates are lifted with a dedicated removal tool and replaced while the space stays in use, with no full closures. Brand refreshes, lease-end restorations and seasonal reconfigurations become viable without rebuilding the floor. For studios working on circular design strategies, this is a paving system that supports change rather than locking the project in place.
From one room to full buildings: scalable project rollout
Multi-site rollouts need floors that behave consistently across geographies and crews. Pave and Go is a standardised system scalable from a single shop fit-out to nationwide retail and hospitality programmes, with the same one-click male-female joint and the same technical certifications on every pallet. Chain retailers, banking networks, restaurant groups and corporate clients deploy the identical specification across hundreds of locations, with predictable timelines and parallel installation teams in different cities. Logistics, training and quality control all simplify around one system.
Start a Pave and Go project: briefing and support
Every Pave and Go project starts with a clear technical and design brief. The team supports architects, interior designers, contractors and clients in defining the right configuration: indoor or outdoor, thickness, anti-slip rating, finish, layout and quantities. Every project is backed by a 5-year warranty, technical documentation in the download area, sample kits and on-site installation guidance. A qualified installation team and complete pre- and post-installation service follow the project from concept to delivery. Get in touch to book a technical consultation.
Do you have any other questions
about Pave and Go?
Contact us for more
INFORMATION
Share your project goals and we’ll help you identify the right Pave and Go solution, from system configuration to application details. Get expert support on performance, intended use and design consistency, with a structured approach that simplifies choices and ensures reliable results.