Interlocking paving for
OUTDOOR PROJECTS
Pave and Go’s interlocking outdoor paving is designed for terraces, courtyards and exposed surfaces requiring a quick, weather-resistant refurbishment. The porcelain stoneware tiles are laid directly onto an existing concrete courtyard or a worn surface, without the need for demolition or fixing work, offering a clean and reversible alternative to traditional outdoor paving.
Designed to withstand frost, UV rays and rain, the system retains its finish throughout the seasons, whilst the R11 non-slip outdoor tiles are ideal for poolside areas and wet zones. Renovation projects for hotel and resort terrace flooring achieve a high-quality finish, with installation and removal causing no disruption.
The outdoor projects shown below demonstrate the weather-resistant interlocking paving in all conditions.
Outdoor interlocking paving projects for every condition
Pave and Go is a frostproof, UV-stable, weather-resistant interlocking paving system for outdoor projects. Porcelain stoneware tiles bonded to a polyurethane backing click into place with a patented joint, ready to use the moment installation ends. Available in 18 mm for pedestrian terraces and 28 mm for intensively used outdoor commercial areas, the system fits balconies, gardens, roof terraces, pool decks, beach resorts and public squares. Discover the outdoor finishes for every project.
Outdoor projects proven by installation data
Outdoor dry-lay paving is installed without screeds, adhesives or chemical bonding. The Pave and Go tile is bonded to a polyurethane backing that protects the edges and integrates the male-female joint, allowing two main configurations: over a compacted gravel substrate, or directly over existing solid pavings with sufficient drainage slope. Installation runs year-round between -5°C and +35°C. Modules deliver consistent joint widths and a clean finished surface backed by documented test data. Download the full technical documentation from the download area.
Terraces and gardens: new floor over the old one
How to install pavers over an existing concrete patio without demolition? Lay Pave and Go on top. The interlocking modules sit directly over old ceramic tiles, weathered concrete pavers, faded natural stone or aged screeds, provided the surface is level and drains properly. No demolition, no debris disposal, no substructure rebuild. Homeowners get a brand-new outdoor floor in days. Landscape architects gain a low-impact renovation route for rooftop gardens, courtyards and condominium terraces, and a paving that respects existing structures.
Frost, UV and rain: weatherproof paving performance
Outdoor flooring is tested by climate. Pave and Go is engineered to perform across freeze-thaw cycles, prolonged UV exposure, heavy rain, heatwaves and de-icing salts. The porcelain stoneware surface is highly resistant to thermal shock and frost, dimensionally stable under intense sunlight, and unaffected by chemical salts. With water absorption below 0.5% and a 3% installation slope ensuring complete surface run-off, the system avoids standing water and dries quickly after rainfall. From mountain chalet terraces to seaside resort decks, this is weatherproof outdoor paving that performs across radically different climates.
Pool decks and wet zones: R11 anti-slip outdoor paving
R11 anti-slip pool deck tiles are porcelain stoneware tiles certified to grip even when wet. Pave and Go is manufactured with anti-slip ratings up to R11 (A+B+C), with friction coefficients suited to outdoor wet zones. The textured finish delivers reliable grip without becoming abrasive, important in wellness areas where guests spend hours barefoot. Combined with frost resistance, 3% drainage slope and dry interlocking installation, this is the answer for pool surrounds, spa terraces, beach clubs and outdoor showers, in new builds or resort renovations.
Hotels and resorts: terrace paving that sets the tone
In hospitality, the outdoor terrace is part of the first impression. Pave and Go gives hotels, resorts, restaurants and beach clubs a premium Italian porcelain stoneware paving that visually echoes the indoor finish, supporting brand continuity from the lobby to the pool. The dry installation, possible year-round and without weather dependency, lets properties refurbish poolside areas, rooftop bars and outdoor dining terraces in the gap between seasons, with no long closures. Damaged tiles can be replaced individually while the property remains in use. See real applications in completed hospitality projects.
Temporary outdoor setups and events: quick, no trace
Festivals, brand activations, pop-up dining, outdoor showrooms and event stages need temporary outdoor flooring that arrives fast, performs under load and leaves no trace. Pave and Go is dry-laid with no adhesives, so entire surfaces, including raised event stages and walkways, can be assembled in days, used through the show, then lifted with the removal tool and stored for the next location. Public squares, sports venues, private estates and historic gardens stay untouched. For anyone searching for reusable stage flooring for outdoor events, click and go paving becomes a portable asset.
Do you have any other questions
about Pave and Go?
Contact us for more
INFORMATION
Share your project goals and we’ll help you identify the right Pave and Go solution, from system configuration to application details. Get expert support on performance, intended use and design consistency, with a structured approach that simplifies choices and ensures reliable results.